{"id":568,"date":"2015-11-09T11:01:20","date_gmt":"2015-11-09T10:01:20","guid":{"rendered":"https:\/\/blog.4-it.net\/?p=568"},"modified":"2015-11-09T11:01:20","modified_gmt":"2015-11-09T10:01:20","slug":"ubiquiti-unifi-ap-restore-zur-original-firmware","status":"publish","type":"post","link":"https:\/\/blog.4-it.net\/?p=568","title":{"rendered":"Ubiquiti UniFi AP – Restore zur original Firmware"},"content":{"rendered":"

The process of resetting the UAP is as follows<\/p>\n

Please download the following software before you start this guide –\u00a0http:\/\/kin.klever.net\/dist\/pumpkin-2.7.3.exe<\/p>\n

    \n
  1. Unplug the ethernet from the Unifi AP<\/li>\n
  2. Press and hold in a paper-clip or other object in to the Reset hole (next to the Ethernet plug) on the AP. Make sure you can feel it pushed in.<\/li>\n
  3. Plug the Ethernet cable back in whilst still keeping the reset button held in.<\/li>\n
  4. After around 25 seconds the light on the Unifi will go between flashing orange then green, orange then green etc. This means the AP is in upgrade mode.<\/li>\n
  5. Set your PC’s network IP address to 192.168.1.25, subnet is 255.255.255.0 and gateway is 192.168.1.20 (you might wish to do this in preparation)<\/li>\n
  6. Plug the LAN cable from the Unifi POE adapter in to your PC.<\/li>\n
  7. Open the TFTP application (in this instance we’re using the Pumpkin software as an example) and click on „Put File“. In „Local file“ choose your original firmware file. In the „Remote host“ field enter 192.168.1.20 – then click OK.<\/li>\n
  8. You should now have some indication of the file being transferred )in Pumpkin you’d see the numbers going up as the file is transferred).<\/li>\n
  9. The firmware on your AP will be upgraded and the device will automatically reboot back to original settings.<\/li>\n
  10. Re-connect the LAN cable from the Unifi POE adapter in to your broadband router.<\/li>\n
  11. Remember to set your PC’s network IP back to what it was before (DHCP etc).<\/li>\n<\/ol>\n

    Quelle: support.purplewifi.net<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"

    The process of resetting the UAP is as follows Please download the following software before you start this guide –\u00a0http:\/\/kin.klever.net\/dist\/pumpkin-2.7.3.exe Unplug the ethernet from the Unifi AP Press and hold in a paper-clip or other object in to the Reset hole (next to the Ethernet plug) on the AP. Make sure you can feel it […]<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[32,33],"tags":[],"class_list":["post-568","post","type-post","status-publish","format-standard","hentry","category-netzwerk","category-ubiquiti"],"_links":{"self":[{"href":"https:\/\/blog.4-it.net\/index.php?rest_route=\/wp\/v2\/posts\/568","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/blog.4-it.net\/index.php?rest_route=\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/blog.4-it.net\/index.php?rest_route=\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/blog.4-it.net\/index.php?rest_route=\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/blog.4-it.net\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=568"}],"version-history":[{"count":1,"href":"https:\/\/blog.4-it.net\/index.php?rest_route=\/wp\/v2\/posts\/568\/revisions"}],"predecessor-version":[{"id":569,"href":"https:\/\/blog.4-it.net\/index.php?rest_route=\/wp\/v2\/posts\/568\/revisions\/569"}],"wp:attachment":[{"href":"https:\/\/blog.4-it.net\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=568"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/blog.4-it.net\/index.php?rest_route=%2Fwp%2Fv2%2Fcategories&post=568"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/blog.4-it.net\/index.php?rest_route=%2Fwp%2Fv2%2Ftags&post=568"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}